Clik here to view.
the migration has exceeded the maximum switchover time of 100 second(s)
Hello together, i have a big problem with my migration function on our ESX 5.1 Cluster. We have two ESX-Hosts which are connected by iSCSI and using two SAN. Also there are two switches, so we have an...
View ArticleRe: Tech preview module configuration fails on Fedora 19 host /...
WORK for me, i tried with 3 machine, FC19 64bit, Kernel 3.10.4-300, work like charm. This link help to resolve this issue. ECS Installation Manual: Fedora 19 with kernel 3.10 fail to install vmplayer...
View ArticleClik here to view.
Re: vmotion -- dry run through powercli
If these fields are blank that would mean that vSphere sees no problems in a vMotion of the VM to the specific host.
View ArticleClik here to view.
Re: Problem with "no available vRAM capacity" ESX5
Thanks for quick replies! vmroyaleHost: 5.0.0 build 1117897vCenter: 5.0.0 build 623373 weinstein5I didn't have some reservations what I could see but I did have some limit's. I took them away but no...
View ArticleRe: how to set up vmware channel between primary and secondary vCenter...
Make sure the VLAN is in layer 2, otherwise, Channel Network won't work.
View ArticleRe: Failed to create data-va
it's 1.0 and not a fresh install, i just wanted to add 1 more data-vm as the user's growing.
View ArticleRe: Two Major issues in WSX 1.0.1
WSX 1.1.0 beta still cannot connect to free ESXi nodes.
View ArticleОшибка запуска vCenter
Здравствуйте.Изначально vCenter установлен на WinServ2003x64 Ent и размещался на виртуалке в HyperV. С помощью утилиты WMware coverterоперационная система с vCenter была перенесена, на сервер с ESXi...
View ArticleRe: SSO LDAP запрет гостевого доступа
Как вариант, можно попробовать ограничить до определеннго OU, для которого разрешен доступ, как и для всех его групп и пользователей
View ArticleVDP backup performance over NBD
I got a backup bottleneck on VDP over NBD on a 1Gbps link. The backup is capped at 20MB/s very steadily, but if I start a cold VM migration between those two hosts (same source and destination) at the...
View ArticleRe: Floating pool, persona management, default printer not remembered
Hi, please see my post, which details on how I resolved this Solution - Saving default printers after recompose
View ArticleRe: Enabling network for VM
But I have configured IP settings for VMnet8, which is used for NAT, correct? So how can I switch my VM networks to bridged?
View Articlehow to make a better performance during storage vmotion?
I have a local storage and I add a iSCSI storage to the host.But when I migrated VM from the local storage to iSCSI storage I got a poor performance?How to configure the network between ESXI and iscsi...
View ArticleRe: Need to set "vSphere Distributed Switch" after fresh install ESXi 5.1 ??
So you only upgrading one host in the cluster to 5.1? or only 1 is having a fresh install? The DVS settings are set at the vCenter level and you just add hosts into it, so the DVS setup is not going to...
View Article100% successful P2V leaves multiple empty(?) delta files
I have done a successful P2V test conversion from a Symantec System Recovery image. Although it completed successfully, vCenter told me that "Virtual machine disks consolidation is needed." When I go...
View ArticleRe: how to make a better performance during storage vmotion?
it all depends how the iSCSI on the back end is configured for a starters disk speed, raid configbut network wise you really need jumbo frames, separate nic or nics and yes vMotion should have its own...
View ArticleRe: Software required to get the report of unused VMs
Thank you Danny. I have gotten the report of idle VMs through vCenter Operation Manager(VCOP 5.7.1).
View ArticleRe: CPU Ready vs CPU Wait
Ok wait is a tricky one which can mean nothing but can mean something is wrong.basically %wait + %rdy + %cstp + %run = 100% %RDY is the amount of time the virtual machine is ready to use a pCPU but has...
View Article